We will MEET OR BEAT any other advertised, authorized dealer/distributor prices. GUARANTEED!
|
TIRE PRESSURE MONITOR ACCESSORIES:
|
| Extended Cabled Antenna Kit |
 |
- For use with monopole Monitors only
- 35 ft coax cable and SMA & TMC connectors. One end attaches to the Monitor and the other end attaches to 7 inch whip antenna (included).
- Most tractor/trailers require the Antenna Kit to ensure better reception
- May be returned for a full refund if returned within six months (after you have tested your system on a trip).
- Mounting bracket included
|
 |
| Price: $50.00 |
|
 |
| |
|
|
|
|
|
|
| Hard Wired/Stripped End Power Cord |
|
 |
|
- Hard wire to a power source and to Monitor via USB plug
- 8 ft cord
|
 |
| Price: $8.00 |
|
|
| |
|
|
|
|
 |
| Cigarette Lighter Plug/Fixed End Power Cord |
|
 |
|
- Connects Monitor via USB plug to 12-volt power outlet
- 8 ft cord
|
|
|
|
|
|
| |
| AC/DC Wall Plug-in Kit |
|
 |
|
(Converts 110-volt AC to 12-volt DC on PressurePro Monitor)
- Kit includes power cord and AC/DC converter
- Power cord connects converter to all Monitors and Echo Repeater
- Converter plugs into standard 110 AC outlet
- For use in vehicles that do not have a 12-volt power source
- 8 ft cord
|
| Price: $17.00 |
|
|
| |
|
|
|
|
| |
| 24/12 Volt Fixed End Power Cord |
|
|
|
- Connects Monitor to 24-volt power outlet
- Converts power from 24-volt to 12-volt PressurePro Monitor
- 8 ft cord
|
|
|
| Price: $12.00 |
|
|
| |
|
|
|
|
|
| RS232 Fixed End Power/Data Cord |
|
 |
|
- Connects to 12-volt power outlet
- RS232 data cord required for downloading data from Monitor
- Utilizes DB9 connector for downloading to a computer
- 8 ft cord
|
|
|
|
|
|
|
| 24/12 Volt RS232 Fixed End Power/Data Cord |
|
 |
|
- Connects to 24 or 12-volt power source
- RS232 data cord required for downloading data from Monitor
- Utilizes DB9 connector for downloading to a computer serial port
|
|
|
|
|
|
|
| Molex Power Cord |
 |
- Jacketed, 5-wire, 10′ power cord with MOLEX connector
- For use with Intelligent Repeaters and BRIDGES
- Open ended for connection to tractor/trailer wiring network
- Supports Open Collector function; wired for J2497 & J1708 networks.
- 10 ft cord
|
|
| Price: $65.00 |
|
|
| |
|
|
|
|
|
|
| Molex T-Breakout Cord |
 |
- For use with Intelligent Repeater on trailers/dollies
- Jacketed, 2-wire, 8′ power cord
- Molex connector on one end/T-Breakout on other for easy link to vehicle network
- T-Breakout attaches between the male/shroud of the Weather Pack connector of the standard ABS harness (no splicing necessary)
|
|
| Price: $75.00 |
|
|
| |
|
|
|
|
|
| Visor Clip/Suction Cups |
|
|
|
|
- 2 clips per set
- Fits onto Monitor from top or bottom for installation onto visor or window
|
|
| Price: $10.00 |
|
|
|
| |
|
|
|
|
|
| Sensor Seal Kit |
|
|
|
|
- Includes ten (10) core depressors/”O” rings and one (1) installation tool
- Allows secure installation of seal replacements into Sensor
|
|
| Price: $14.00 |
|
|
|
|
| Sensor Installation Tool |
|
 |
|
- Plastic tool to install Sensors on the inside dual valve stem
- 12″ handle easily reaches those hard to reach inside dual valve stems
- Sensor seats firmly in end of tool but releases when Sensor is snugly on stem
|
|
| Price: $4.50 |
|
|
| |
|
|
|
|
|
|
| Schrader Mast Air Inflator |
 |
- Very accurate, high quality, factory calibrated inflator
- Comes with custom test performance curve
- Greatly shortens time required to check/correct tire pressures
- Measurement scale: 10 to 170 psi; 0.7 to 12 bar
|
|
| Price: $140.00 |
|
|
| |
|
|
|
|
|
|
|
| Sensor Lock Kit (Theft Deterrent) |
|
|
|
|
- Includes small custom wrench and 10 jam nuts for 10 wheel positions.
- Not required for standard installation; use for theft deterrent purposes only.
- Includes (1 small wrench & 10 jam nuts)
|
|
| Price: $10.00/kit |
|
|
| |
|
|
|
|
|
| Dashtop Monitor Mounting Bracket |
|
 |
|
- Bracket mounts on dash area (no screws). Monitor attaches to bracket via Velcro for upright position. (Does not include Monitor.)
- 2 ¾” W x 2 ¼” D x 1 ½” H
- Velcro included
|
|
|
| Price: $6.00 |
|
|
| |
|
|
|
|
|
| Monopole Antenna -3.5 inch |
|
 |
|
- For use on SMA connector on Monitor (required if not using cabled antenna kit).
|
|
|
| Price: $10.00 |
|
|
| |
|
|
|
|
|
| |
| Replacement 6″ Monopole Monitor Antenna for Extended Antenna Kit |
|
 |
|
•Order this 6″ Monopole Monitor Antenna if you have the Cabled Antenna Kit and require a replacement antenna.•Also used for use on Intelligent Repeater. |
|
| Price: $15.00 |
|
|
| |
|
|
|
|
| |
| TNC Antenna Adapter |
|
 |
|
- For 3.5″ SMA antenna when using with TNC connection on Intelligent Repeater, or if connecting to end of 35′ coax cable.
|
|
| Price: $6.00 |
|
|
| |
|
|
|
|
| |
|
| T-Valve Stem – Regular |
|
|
|
|
- Screws onto tire valve stem – allows Sensor to be installed with trailer air-up systems.
- When increasing tire pressures, must remove tire Sensor for one minute to establish new trigger alert pressure.
|
|
| Price: $8.50 |
|
|
| |
|
|
|
|
| |
|
| T-Valve Stem – Large Bore Stem |
|
|
|
|
- For utilization on large bore valve stems, allows air filling while Sensor is installed
|
|
| Price: $25.00 |
|
|
| |
|
|
|
|
| |
|
| T-Valve Stem – Super Large Bore Stem |
|
|
|
|
- For utilization on super large bore valve stems, allows air filling while Sensor is installed
- One side super large bore, and large bore on other side
- Main valve installs directly into rim or onto an existing super large bore stem
|
|
| Price: $35.00 |
|
|
| |
|
|
|
|
|
| Motorcycle Monitor Mount |
|
|
|
|
- Mount attaches directly to handlebars of motorcycle for easy viewing
- Aluminum clamp tightens using a 9/64 hex key, included with mount
|
|
| Price: $15.00 |
|
|
| |
|
|
|
|
| |
|
| Optional RAM Mount – (for mounting Monitor) |
|
|
|
|
- Ram Mount with 2.5″ arm and 2 knuckle end plates.
- Allows for direct mounting to vehicle
- Screws allow adjustment of mount at both top and bottom
- Total length and weight: 4″ and 6.6 oz. (Stem is 2.5″ with weight of 2.8 oz. Round plates with knuckle ball, adds 1.75″ to top and bottom.)
|
|
| Price: $35.00 |
|
|
| |
|
|
|
|
|
| RAM Mount Suction Cup Attachment |
|
|
|
|
- Suction cup attachment attaches to windows, metal dashes(non-porous surfaces)
- Power suction lever insures secure fastening
- Total length and weight: 3.6 oz and 3.25″
|
|
| Price: $20.00 |
|
|
| |
|
|
|
|
|
| Ram Mount/Suction Cup Combo |
|
|
|
|
- Ram Mount and Suction Cup Combination
- Comes with suction cup attached at one end and a regular round mount plate on the other
|
|
| Price: $50.00 |
|
|
| |
|
|
|
|
|
| RAM Mount Mounting Pad |
|
|
|
|
- 2.43″ Diameter double stick mounting pad
- Will stick to all non-porous surfaces
|
|
| Price: $5.00 |
|
|
|
|
|
| |
| |
| |
| Crossfire Std. Braided Steel Hose – 120 psi system |
|
| |
|
- w/single fill “T” fitting & mounting bracket
- Includes 2 hoses for one axle
- Includes Status Gauge
|
| Price: $82.50 |
|
|
| |
|
| |
| |
| |
| Crossfire Std. Braided Steel Hose – 110 psi system |
|
| |
|
- w/single fill “T” fitting & mounting bracket
- Includes 2 hoses for one axle
- Includes Status Gauge
|
| Price: $82.50 |
|
|
|
|
| |
| |
| |
| Crossfire Std. Braided Steel Hose – 105 psi system |
|
| |
|
- w/single fill “T” fitting & mounting bracket
- Includes 2 hoses for one axle
- Includes Status Gauge
|
| Price: $82.50 |
|
|
|
|
| |
| |
| |
| Crossfire Std. Braided Steel Hose – 100 psi system |
|
| |
|
- w/single fill “T” fitting & mounting bracket
- Includes 2 hoses for one axle
- Includes Status Gauge
|
| Price: $82.50 |
|
|
|
|
| |
| |
| |
| Crossfire Std. Braided Steel Hose – 80 psi system |
|
| |
|
- w/single fill “T” fitting & mounting bracket
- Includes 2 hoses for one axle
- Includes Status Gauge
|
| Price: $82.50 |
|
|
|
|
| |
| |
| |
| Crossfire 16″ Braided Steel Hose |
|
| |
|
- w/additional “T” Fitting for 2nd Sensor use on std Crossfire system.
- Requires 2 hoses per axle
|
| Price: $20.00 |
|
|
|
|
Other Accessories:
|
| PICO Folding Arm Chair |
|
|
|
|
- This high quality, mesh back and seat, chair is easily portable with its own travel bag that also serves as a Chair Back Storage Caddy.
- When the chair is folded, package is about the size of a laptop computer; chair folds to less than 4″ thick
- Rated “Best Overall” by The Wall Street Journal
- Anodized Aluminum Steel Hybrid Finish/Frame.
- 600-denier nylon mesh seat.
- Color: Sage (Blue is sold out)
- Armrests have integrated cup holder and also a pocket.
|
|
|
|
