Sensor, High Heat

(Order one for each tire to be monitored)

Use with Refuse Trucks – Replaces Valve Stem Cap

Click for larger Image

PressurePro™ Sensors

Sensors: Attached to each tire’s valve stem to measure and transmit tire pressure. Pressure readings are wirelessly sent to the Monitor (order Monitor separately).

• Recommended for refuse trucks due to the high heat generated by frequent stops.

Weight: .6 oz (17 grams)
Dimensions: 1.11″ Dia. x 1.01″H
Pressure Range: 10-199 psi
Effective Signal Range: Line of sight – 200 ft.
Frequency: 433.92 MHz

We no longer carry these sensors…

BATTERY REPLACEMENT PROCEDURE

Batteries in the Sensors last 4-5 years.  A light  in the lower right corner of the Monitor (looks like a small battery) will come on when the batteries are low.  Simultaneously, the Monitor will flash the location  to indicate which Sensor needs new batteries.  The battery light only stays on for about 2 weeks, so if you haven’t noticed it and it has been 4-5 years (and the Sensor is not working), then you probably need new batteries.

Procedure for receiving battery replacements:  The cost of a replaced Sensor with new batteries is less than the cost of a new Sensor.  Print out Battery Exchange Sensors Form, send form and old battery(ies) via first class mail to:

L&S Safety Solutions LLC ;  PO Box 20309;  Wickenburg, AZ  85358.

You will receive a brand new Sensor(s) with new technology, and new batteries, for the price of the batteries.  Current pricing for the replacement, as of  February, 2010 is $35 per Sensor.  Include your Sensor(s) along with your contact information and credit card # or a check.  A padded envelope is fine to use.   New Sensors with new batteries will be sent to you within the week.